Pre-Collision Throttle Management
Turning off Pre-Collision Throttle Management
Pressing and holding the Pre-Collision Braking System OFF switch for approximately 2 seconds or longer will turn off the Pre-Collision Throttle Management System. When 1 short
beep sound emits, this function is turned off and the Pre-Collision Braking System OFF indicator light on the instrument panel illuminates.
To turn the system back on, press and hold the Pre-Collision Braking System OFF switch
again for approximately 2 seconds or longer. When this function is turned on, the PreCollision Braking System OFF indicator light turns off.
Refer to page 30.
S01120
S01121
NOTE
When Pre-Collision Throttle Management is turned off, the Pre-Collision
Braking System also turns off.
Even when Pre-Collision Throttle Management is turned off, if the ignition
switch is turned off and the engine is restarted, Pre-Collision Throttle
Management will be turned on. The default setting for Pre-Collision
Throttle Management when the vehicle is restarted is “ON”.
59