About EyeSight
■
(CRUISE) switch
Switches cruise control* on/off.
When this switch is pressed “
” or “
” appears on the EyeSight display area in the
multi information display. This indicates that the main cruise control is turned on.
Refer to pages 38 and 68.
Can be used to cancel the cruise control.
Refer to pages 48 and 73.
* Adaptive Cruise Control and Conventional Cruise Control
■ RES/SET switch
●SET/-
Can be used to set cruise control*.
Can be used to reduce the set vehicle speed (when cruise control* is currently set).
Refer to pages 39 and 43 (for Adaptive Cruise Control).
Refer to pages 70 and 72 (for Conventional Cruise Control).
●RES/+
After cruise control* is canceled, this switch can be used to resume the cruise control
function at the vehicle speed that was previously set.
Can be used to increase set vehicle speed (when cruise control* is currently set).
Refer to pages 42 and 51 (for Adaptive Cruise Control).
Refer to pages 71 and 76 (for Conventional Cruise Control).
* Adaptive Cruise Control and Conventional Cruise Control
■
/
(Following distance setting) switch
Can be used to switch the set following distance in 4 stages: (only when Adaptive Cruise
Control is on).
Refer to page 45.
When the
(CRUISE) switch is on, press and hold this switch for approximately 2
seconds or longer to select Adaptive Cruise Control or Conventional Cruise Control.
■
switch/
switch
These are used in the following situations.
When switching the screen displayed on the multi information display.
When changing the Warning Volume settings, etc.
Refer to page 81.
18