Starting and operating/Cruise control
& Parking tips
Cruise control
When parking your vehicle, always perform the following items.
. Apply the parking brake.
. For MT models, place the shift lever in
the “1” (1st) for upgrade or “R” (Reverse)
for a downgrade.
. For AT and CVT models, place the
select lever in the “P” (Park) position.
NOTE
For models with EyeSight system:
Refer to the Owner’s Manual supplement for the EyeSight system.
Cruise control enables you to maintain a
constant vehicle speed without holding
your foot on the accelerator pedal and it is
operative when the vehicle speed is 25
mph (40 km/h) or more.
Never rely on the transmission alone to
hold the vehicle.
When facing downhill, the front wheels
should be turned into the curb.
When parking on a hill, always turn the
steering wheel as described here. When
the vehicle is headed up the hill, the front
wheels should be turned away from the
curb.
7-41
WARNING
Do not use the cruise control under
any of the following conditions.
These may cause loss of vehicle
control.
. driving up or down a steep grade
. driving on slippery or winding
roads
. driving in heavy traffic
. towing a trailer
NOTE
Make sure the cruise control system is
turned off when the cruise control is
not in use to avoid unintentionally
setting of the cruise control.
– CONTINUED –