Subaru Outback Manuals 2014 Outback Owner's Manual | Page 614

Starting and operating/Starting and stopping the engine (models without push–button ignition switch) foliage, paper, or other flammable substances. The exhaust pipe and exhaust emissions can create a fire hazard at high temperatures. CAUTION . If the engine is stopped during driving, the catalyst may overheat and burn. . When starting the engine, be sure to sit in the driver’s seat (except when using the remote engine start system). NOTE . Avoid rapid racing and rapid acceleration immediately after the engine has started. . For a short time after the engine has started, the engine speed is kept high. When the warm-up is completed, the engine speed lowers automatically. . On rare occasions, it may be difficult to start the engine depending on the fuel and the usage condition (repeated driving of a distance in which the engine has not warmed up sufficiently). In such a case, it is recommended that you change to a different brand of fuel. . On rare occasions, transient knocking may be heard from the engine when the accelerator is operated rapidly such as a rapid start-up and a rapid acceleration. This is not a malfunction. . The engine starts more easily when the headlights, air conditioner and rear window defogger are turned off. . After the engine starts, the engine speed will be kept high until the engine has warmed up sufficiently. ! MT models 1. Apply the parking brake. 2. Turn off unnecessary lights and accessories. 3. Depress the clutch pedal to the floor and shift the shift lever into neutral. Hold the clutch pedal to the floor while starting the engine. The starter motor will only operate when the clutch pedal is depressed fully to the floor. 4. Turn the ignition switch to the “ON” position and check the operation of the warning and indicator lights. Refer to “W \