5-64
Audio/Hands–free system
displayed and the mode changes to
the “PHONE SETUP” mode.
2. Registered cell phones are displayed
in the saved order. While displayed, if the
“TUNE” dial is turned, the next registered
cell phone is displayed. Press the ON
to close the Hands-free
hook button
menu.
3. Select a cell phone by performing
either of the following procedures.
– Operate the “TUNE” dial.
.
– Press the talk switch
4. After “SELECTED” (type A audio)/
“Phone is selected.” (type B audio) is
displayed, you can select the following
menus.
displayed, a new passkey can be
entered.
2. Input the new passkey by performing
one of the following procedures.
– Operate the “TUNE” dial.
and say
– Press the talk switch
the passkey.
3. Select the “CONFIRM” (type A audio)/
“Confirm passkey?” (type B audio) menu.
– The new passkey is displayed, the
passkey is changed and the mode
changes to the “PHONE SETUP”
mode.
! List phones function
The cell phone voice tags saved in the cell
phone list are displayed by using the list
phones function.
. “SELECT PHONE” to connect the
selected cell phone
. “CHANGE NAME” (type A audio)/
“Change Phone Name” (type B audio) to
change the voice tag
. “DELETE” (type A audio)/“Delete
Phone” (type B audio) to delete the
selected cell phone from the list
. “GO BACK” to go back to the “PHONE
SETUP” mode
1. Select the “LIST PHONES” menu.
– If no cell phones are registered,
“EMPTY” (type A audio)/“No Phones
have been paired.” (type B audio) is
1. Select the “SET PASSKEY” menu.
– After the currently set passkey is
1. Select the “DELETE” (type A audio)/
“Delete Phone” (type B audio) menu.
2. Select a cell phone to be deleted by
performing one of the following procedures.
– Operate the “TUNE” dial.
and say
– Press the talk switch
the voice tag.
and use
– Press the talk switch
the list phones function.
3. Select the “CONFIRM” (type A audio)/
“Confirm delete phone?” (type B audio)
menu.
– “DELETED” (type A audio)/“Phone
has been deleted.” (type B audio) is
! Changing the voice tag of the cell
phone
1. Select the “CHANGE NAME” (type A
audio)/“Change Phone Name” (type B
audio) menu.
– If no cell phones are registered,
“EMPTY” (type A audio)/“No Phones
have been paired.” (type B audio) is
displayed and the mode changes to
the “PHONE SETUP” mode.
2. Select the cell phone by performing
one of the following procedures.
– Operate the “TUNE” dial.
and say
– Press the talk switch
the voice tag.
and use
– Press the talk switch
the list phones function (refer to “List
phones function” F5-64.).
3. Register the voice tag. For details,
refer to “Preparation for using the Handsfree system” F5-48.
! Setting passkey
! Deleting registered cell phone
from the list