3-64
Instruments and controls/Tilt/telescopic steering wheel
manually folded slightly forward of the
regularly unfolded position, when you
turn the ignition switch from the
“LOCK/OFF” position to the “Acc” or
“ON” position, the outside mirrors may
automatically fold further forward depending on the status of the power
folding mirror switch. When this happens, press the power folding mirror
switch. By doing so, the outside mirrors which have been folded to the
furthest forward position will extend to
the regularly unfolded position and
then fold rearward in the usual way. In
order to unfold the outside mirrors,
press the switch again.
. When you unfold the outside mirrors
manually, the mirrors may become
wobbly. Be sure to unfold the mirrors
by operating the switch. If the outside
mirrors are still wobbly, fold the mirrors
again and then unfold them by operating the switch again.
. When the temperature is low, the
outside mirrors may stop during operation. Push the switch again. When the
outside mirrors do not work by operating the switch, move the outside mirrors several times manually. This
makes it possible to operate them by
switch operation.
. When you operate the power folding
mirror switch continuously, it may not
work. This is not a malfunction. Operate after waiting for a short period of
time.
Tilt/telescopic steering wheel
WARNING
. Do not adjust the steering wheel
tilt/telescopic position while driving. This may cause loss of
vehicle control and result in
personal injury.
. If the lever cannot be raised to
the fixed position, adjust the
steering wheel again. It is dangerous to drive without locking
the steering wheel. This may
cause loss of vehicle control
and result in personal injury.
1. Adjust the seat position. Refer to