Subaru Outback Manuals 2014 Outback Navigation System Manual | Page 96

Read First ■ Map operations Operation You can touch a position on the map, and then check that position during navigation. The map's current position tracking function stops (the car marker (a blue arrow by default) is not fixed in position on the screen), and the control buttons are displayed allowing you to change the map display. Button Explanation Using drag & No buttons drop to move the map 94 Navigation / In 3D mode, you can change the vertical display angle of the map. The display changes slowly if you tap the button, or changes in a smooth, continuous motion if you touch & hold the button. Rotate left/Rotate right Button / Change the area of the map displayed on the screen. Road names and other characters are always displayed in the correct direction and at the same font size, and you only need to check necessary roads and icons. In 3D mode, the map cannot be reduced endlessly. The map changes to 2D mode if you zoom out beyond the defined amount. The display changes slowly if you tap the button, or changes in a smooth, continuous motion if you touch & hold the button. Tilt up/Tilt down Operation Zoom in/Zoom out / Changes the horizontal display angle of the map. The display changes slowly if you tap the button, or changes in a smooth, continuous motion if you touch & hold the button. Explanation You can move the map in any direction you want by touching and holding the map, and moving your finger in the direction you want to move the map.