11-56
Maintenance and service
& Replacing battery of transmitter
3. Remove the transmitter case from the
key head.
1. Remove the screw on the key head.
2. Open the key head using a flat-head
screwdriver.
4. Open the transmitter case by releasing
the hooks.
1)
Negative (−) side facing up
5. Replace the old battery with a new
battery (Type CR1620 or equivalent)
making sure to install the new battery with
the negative (−) side facing up.
6. Put together the transmitter case by
fitting the hooks on the case.
7. Reinstall the transmitter case in the
key head.
8. Reinstall the screw on the key head.
After the battery is replaced, the transmitter must be synchronized with the
remote keyless entry system’s control
unit. Press either the “ ” or “ ” button
six times to synchronize the unit.