Maintenance and service
& Removing air intake duct
11-7
Engine hood
To open the hood:
1. If the wiper blades are lifted off the
windshield, return them to their original
positions.
Use a screwdriver to undo the clips on the
air intake duct, then remove the air intake
duct. Refer to “Type A clips” F11-5.
3. Remove the clip from the fender lining.
Refer to “Type B clips” F11-5.
& Pulling off the fender lining
2. Pull the hood release knob under the
instrument panel.
It is necessary to pull off the fender lining
when replacing some bulbs.
1. Start the engine and turn the steering
wheel fully in the opposite direction of the
bulb to be replaced.
2. Stop the engine.
4. Pull off the fender lining.
– CONTINUED –