9-22
In case of emergency
Rear gate (Outback) – if the
rear gate cannot be unlocked
Always use a flat-head screwdriver
or a similar tool.
In the event that you cannot unlock the
rear gate by operating the power door
locking switches, keyless access function
or the remote keyless entry system, you
can unlock it from inside the cargo area.
To open the trunk lid, insert the key into
the key cylinder and turn it clockwise.
3. To unlock the rear gate, turn the lever
to the right position using a flat-head
screwdriver or a similar tool.
4. Open the rear gate from outside by
raising the rear gate handle.
1. Remove the access cover at the
bottom-center of the rear gate trim using
flat-head screwdriver.
2. Locate the rear gate lock release lever
behind the rear gate trim panel.
CAUTION
Never operate the rear gate lock
release lever with your fingers because doing so may cause an injury.