3-42
Instruments and controls
ker lights, rear side marker lights, tail lights
and license plate lights are automatically
on or off depending on the level of the
ambient light.
! Sensor for the auto on/off headlights
& High/low beam change
(dimmer)
The sensor is on the instrument panel as
shown in the illustration.
To change from low beam to high beam,
push the turn signal lever forward. When
the headlights are on high beam, the high
beam indicator light “ ” on the combination meter is also on.
To switch back to low beam, pull the lever
back to the center position.
“ ” position
The headlights are all off.
NOTE
The sensitivity of the auto on/off headlights can be changed by your
SUBARU dealer. Contact your SUBARU
dealer for details. Also, for models with
type A combination meter, the sensitivity can be changed using the display.
For details, refer to “Auto Light Sensor” F3-40.
CAUTION
If any object is placed on or near the
sensor, the sensor may not detect
the level of the ambient light correctly and the auto on/off headlights
may not operate properly.