Instruments and controls
4)
5)
F3-30.)
Cruise control information display
Odometer (refer to “Odometer” F3-8.)/
double trip meter (refer to “Double trip
meter” F3-9.)
screen, and appear on the display accompanied by a beep. If such a screen is
displayed, take proper action according to
the message shown on the screen.
3-37
NOTE
The warning screen will return to the
original screen after a few seconds. While
the “ ” information reminder is shown on
the display, it may be possible to display
the warning screen again. To recall the
message marked with “ ” on the display,
pull the “ /SET” switch on the steering
wheel toward you.
. The welcome screen will disappear
when the ignition switch is turned to
the “ON” position while the welcome
screen is displayed.
. If any of the doors (including the
rear gate) is opened while the welcome
screen is displayed, the door ajar
warning will appear.
. The welcome screen can be set to
on or off. For details, refer to “Welcome
Good-bye Screen” F3-40.
& Welcome screen
& Starting screen
When the door is unlocked and the
driver’s door is opened, the welcome
screen will appear for approximately 20
seconds.
When the ignition switch is turned to the
“ON” position, the starting screen will
appear for approximately 2 seconds.
Control switch
1) Up (select)
2) Set (enter)
3) Down (select)
& Basic operation
By operating “ ” or “ ” of the control
switch, the screens and selection items
can be switched. When the “ /SET”
switch is pulled toward you, the item can
be selected and set.
If there are some useful messages, such
as vehicle information, warning information, etc., they will interrupt the current
– CONTINUED –