Subaru Outback Manuals 2013 EyeSight® Driving Assist System Manual | Page 50

Pre-Collision Braking System Turning off the Pre-Collision Braking System Pressing and holding the Pre-Collision Braking System OFF switch for approximately 2 seconds (or longer) turns off the Pre-Collision Braking System (including Pre-Collision Brake Assist). When this control is turned off, the Pre-Collision Braking System OFF indicator light on the instrument panel illuminates. To turn the control back on, press and hold the PreCollision Braking System OFF switch for approximately 2 seconds or longer again. When this control is turned on, the Pre-Collision Braking System OFF indicator light turns off. OFF OFF S00377 S00580 NOTE When the Pre-Collision Braking System is turned off, Throttle Management Control function is also turned off. Even when the Pre-Collision Braking System is turned switch is turned off and the engine is then restarted, Braking System will be turned on. The system default vehicle is restarted in “ON”. the Pre-Collision off, if the ignition the Pre-Collision setting when the I Pre-Collision Braking System OFF indicator light This indicator light illuminates when the ignition switch is turned to the ON position, and then flashes for approximately 7 seconds after the engine starts. It turns off when the Pre-Collision Braking System is turned off. It also illuminates under the following conditions. When the VDC OFF switch is pressed and VDC is canceled When the EyeSight system has a malfunction * Refer to page 71. When the EyeSight system has stopped temporarily * Refer to page 72. 48 S00531