Adaptive Cruise Control
(3) Changing the set vehicle target speed
The following two methods can be used to increase the set vehicle target speed.
Using the RES/SET switch
While driving with Adaptive Cruise Control on, if the RES/SET switch is pushed to the
RES/+ side briefly, the set vehicle target speed will increase in increments of 5 MPH (5
km/h). If the RES/SET switch is pushed to RES/+ for more than 1 second continuously,
the set vehicle target speed will increase in increments of 1 MPH (1 km/h) over the time
the switch is pressed. The set vehicle target speed is shown on the multi information
display. Using this method, you can ‘fine tune’ the vehicle’s set target speed.
30
35
S00561
* Models for Canada: Metric units are used.
Using the accelerator pedal
Depressing the accelerator pedal will increase vehicle speed. Once the preferred speed
has been attained, push the RES/SET switch to SET/-. When the switch is released, the
new vehicle target speed will be set.
The following two methods can be used to decrease the set vehicle speed.
Using the RES/SET switch
While driving with Adaptive Cruise Cont ɽ