Subaru Outback Manuals 2013 EyeSight® Driving Assist System Manual | Page 18

About EyeSight MRES/+ After cruise control* is canceled, this switch can be used to resume the cruise control function at the vehicle speed that was previously set. Can be used to increase set vehicle speed (when cruise control* is currently set). * Adaptive Cruise Control and Conventional Cruise Control * Refer to page 29. GCANCEL switch Cancels cruise control*. * Adaptive Cruise Control and Conventional Cruise Control * Refer to pages 34 and 66. G (Following distance setting) switch Can be used to switch the set following distance in 3 stages: Far, Medium and Close (only when Adaptive Cruise Control is set). * Refer to page 32. When the (CRUISE) switch is on, press and hold this switch for approximately 2 seconds or longer to select Adaptive Cruise Control or Conventional Cruise Control. G switch/ switch These are used in the following situations. When switching the screen displayed on the multi information display. When changing the warning volume settings, etc. * Refer to page 74. G (Info)/SET switch This is used in the following situations. When the multi information display pop up screen is displayed again. * Refer to page 74. When changing the warning volume settings, etc. * Refer to page 74. 16