Maintenance and service
! Outback
11-53
4. Install a new bulb.
5. Reinstall the lens.
6. Tighten the mounting screws.
& Dome light
1. Remove the mounting screws using a
Phillips screwdriver.
2. Remove the lens.
1. Remove the lens by prying the edge of
the lens with a flat-head screwdriver.
2. Turn the bulb until the flat surfaces at
its ends are aligned vertically.
3. Pull the bulb straight downward to
remove it.
4. Install a new bulb.
5. Reinstall the lens.
3. Pull the bulb out of the socket.
– CONTINUED –