In case of emergency
9-15
After towing, remove the towing hook from
the vehicle and stow it in the tool bucket.
Fit the towing hook cover on the bumper.
Rear towing hook:
1. Take the towing hook out of the tool
bucket and take the screwdriver out of the
tool bucket. Take the jack handle out of
the trunk (Legacy) or cargo area (Out-
back).
WARNING
Do not use the towing hook except
when towing your vehicle.
Front tie-down hooks:
3. Screw the towing hook into the
threaded hole until its thread can no
longer be seen.
2. Pry off the cover on the rear bumper
using a screwdriver, and you will find a
threaded hole for attaching the towing
hook.
The front tie-down hooks are located
between each of the front tires and the
front bumper.
4. Tighten the towing hook securely
using the jack handle.
– CONTINUED –