In case of emergency
Outback
6. Take out the tool bucket and turn the
attaching bolt counterclockwise, then take
the spare tire out.
9-7
7. Loosen the wheel nuts using the wheel
nut wrench but do not remove the nuts. Turn the jackscrew by hand until the jack
head engages firmly into the jack-up point.
8. Place the jack under the side sill at the
front or rear jack-up point closest to the flat
tire. 9. Insert the jack handle into the jack-
screw, and turn the handle until the tire
clears the ground. Do not raise the vehicle
higher than necessary.
NOTE
If the spare tire provided in your vehicle
is a temporary spare tire, carefully read
“Temporary spare tire” F9-2 and
strictly follow the instructions.
– CONTINUED –