In case of emergency
Rear gate (Outback) – if the
rear gate cannot be unlocked
Always use a flat-head screwdriver
or a similar tool.
In the event that you cannot unlock the
rear gate by operating the power door
locking switches or the remote keyless
entry system, you can unlock it from inside
the cargo area.
9-19
Moonroof – if moonroof cannot be closed
If the moonroof cannot be closed with the
moonroof switch, you can close the moonroof manually.
1. Take out the screwdriver from the tool
bucket.
2. Open the overhead console. Refer to
“Overhead console” F6-8.
3. To unlock the rear gate, turn the lever
to the right position using a flat-head
screwdriver or a similar tool.
4. Open the rear gate from outside by
raising the rear gate handle.
1. Remove the access cover at the
bottom-center of the rear gate trim using
flat-head screwdriver.
2. Locate the rear gate lock release lever
behind the rear gate trim panel.
3. Remove the two screws that retain the
moonroof switch body. Then, remove the
moonroof switch.
CAUTION
Never operate the rear gate lock
release lever with your fingers because doing so may cause an injury.
– CONTINUED –