In case of emergency
. If the cap cannot be removed,
contact your SUBARU dealer for
inspection.
. After releasing the electronic
parking brake by using the electronic parking brake release tool,
make sure that the cap is reinstalled to the parking brake release device. If the cap is not
reinstalled, water or dust enters
the device and the device may
malfunction.
9-17
3. Make sure that the brake system
warning light and the indicator light on
the parking brake switch have turned off.
4. Use tire stops under the tires to
prevent the vehicle from moving.
5. Take out the electronic parking brake
release tool. Refer to “Maintenance tools”
F9-3.
NOTE
It may be difficult to release the electronic parking brake by using the
electronic parking brake release tool.
Have your SUBARU dealer release the
electronic parking brake if necessary.
In the event that you cannot release the
electronic parking brake by pulling the
electronic parking brake switch or by
depressing the accelerator pedal, you
can release the electronic parking brake
manually by using the electronic parking
brake release tool.
1. Shift the shift lever in the “1” or “R”
position (MT models) or the select lever in
the “P” position (AT and CVT models).
2. Turn the ignition switch to the “LOCK