Subaru Outback Manuals 2011 Outback Owner's Manual | Page 296

7-38 Starting and operating Cruise control Cruise control enables you to maintain a constant vehicle speed without holding your foot on the accelerator pedal and it is operative when the vehicle speed is 25 mph (40 km/h) or more. switch is turned off when the cruise control is not in use to avoid unintentionally setting of the cruise control. & To set cruise control WARNING When facing downhill, the front wheels should be turned into the curb. Do not use the cruise control under any of the following conditions. These may cause loss of vehicle control. . driving up or down a steep grade . driving on slippery or winding roads . driving in heavy traffic . When towing a trailer NOTE . If you press the “CRUISE” main switch button while turning the ignition switch “ON”, the cruise control function is deactivated and the cruise control indicator light flashes. To reactivate the cruise control function, turn the ignition switch back to the “Acc” or “LOCK” position, and then turn it again to the “ON” position. . Make sure the “CRUISE” main 1. Press the “CRUISE” main switch button.