3-28
Instruments and controls
a long time with the light control
switch set to a position other
than “OFF”, the battery may be
discharged.
& Headlights
: Auto on/off headlights
When the ignition switch is in the “ON”
position, the headlights, instrument panel
illumination, front side marker lights, tail
lights and license plate lights are automatically on or off depending on the level
of the ambient light.
CAUTION
If any object is placed on or near the
sensor, the sensor may not detect
the level of the ambient light correctly and the auto on/off headlights
may not operate properly.
NOTE
The sensitivity of the auto on/off headlights can be changed by your
SUBARU dealer. Contact your SUBARU
dealer for details.
& High/low beam change
(dimmer)
! Sensor for the auto on/off headlights
To turn on the headlights, turn the knob on
the end of the turn signal lever.
first position
Instrument panel illumination, tail lights,
front side marker lights and license plate
lights are on.
second position
Headlights, instrument panel illumination,
front side marker lights, tail lights and
license plate lights are on.
The sensor is on the instrument panel as
shown in the illustration.
To change from low beam to high beam,
push the turn signal lever forward. When
the headlights are on high beam, the high
beam indicator light “ ” on the combination meter is also on.
To switch back to low beam, pull the lever
back to the detent position.