Bluetooth AUDIO functions
WARNING
The driver must not attempt to operate or watch the screen
while the vehicle is in motion. Doing so will distract attention
from driving and the road, and could lead accident.
NOTE
• Using the Audio and Visual System with the engine stopped could lower the
battery electricity level. If the initial charge level is too low, the engine may not
start. It is recommended that the system be used only while the engine is running, except when the vehicle is parked in a garage or other enclosed area.
• In the interest of safety, the use of some functions may be unavailable while
driving. The button for a touch screen item that cannot be used will be displayed greyed out.
• Liquid-crystal displays may be difficult to read when wearing polarized
glasses.
Setting the Bluetooth audio
This function enables you to play back audio sources recorded in Bluetooth audio devices.
You need to register the in-vehicle equipment and Bluetooth audio
device before using it. If you have registered two audio devices, you
need to select one of them. (See Page 200)
I About media format
Bluetooth audio devices cannot be connected if they are not compatible with the following Bluetooth profiles.
A2DP (Advanced Audio Distribution Profile)
AVRCP (Audio/Video Remote Control Profile)
NOTE
The available functions are different between the AVRCP 1.0 compatible device
and the AVRCP 1.3 compatible device.
Audio and Visual 169