7-38
Starting and operating
Cruise control
Cruise control enables you to maintain a
constant vehicle speed without holding
your foot on the accelerator pedal and it is
operative when the vehicle speed is 25
mph (40 km/h) or more.
switch is turned off when the cruise
control is not in use to avoid unintentionally setting of the cruise control.
& To set cruise control
WARNING
Do not use the cruise control under
any of the following conditions.
These may cause loss of vehicle
control.
. driving up or down a steep grade
. driving on slippery or winding
roads
. driving in heavy traffic
. When towing a trailer
The cruise control indicator light on the
combination meter will illuminate.
2. Depress the accelerator pedal until the
vehicle reaches the desired speed.
1. Press the “CRUISE” main switch
button.
NOTE
. If you press the “CRUISE” main
switch button while turning the ignition
switch “ON”, the cruise control function is deactivated and the cruise
control indicator light flashes. To reactivate the cruise control function,
turn the ignition switch back to the
“Acc” or “LOCK” position, and then
turn it again to the “ON” position.
. Make sure the “CRUISE” main
3. Press the “RES/SET” switch to the
“SET” side and release it. Then release