Starting and operating
& Starting your vehicle
NOTE
All vehicle doors, the engine hood and
trunk / rear gate must be closed prior to
activating the remote engine start system. Any open entry point will prevent
starting or cause the system to shut
down.
The remote engine start function is activated by pressing the “ ” button twice
within 3 seconds on your remote engine
start transmitter. Upon successful activation the remote start confirming transmitter
button will flash once* and the vehicle will
honk the horn and flash the side marker
lights, tail lights and front position lights
once. The system will check certain
preconditions before starting, and if all
safety parameters are correct, the engine
will start within 5 seconds. Upon successful engine start, the remote start confirmation transmitter button will flash twice
every 5 seconds* and the vehicle will
honk the horn and flash the side marker
lights, tail lights and the front position
lights once, then the lights will illuminate
and remain illuminated, indicating that the
engine is running. While the vehicle is
operating via the remote engine start
function, the power window features will
be disabled. Also, the system has a timer
and will shut down after 15 minutes if you
do not operate the vehicle. Press and hold
the “ ” button for 2 seconds to turn the
e