522
Engine Oil
2.4 L models |
1 ) |
Oil level gauge |
2 ) |
Oil filler cap |
3 ) |
Oil filter |
CAUTION
If the level gauge is not pulled out easily , twist the level gauge right and left , then pull it out . Otherwise , you may be injured accidentally straining yourself .
2 . Pull out the level gauge , wipe it clean , and insert it again .
3 . Be sure the level gauge is correctly inserted until it stops .
2.5 L models 1 ) Full level 2 ) Low level
3 ) Approximately 1.1 US qt ( 1.0 liter , 0.9 Imp qt ) from low level to full level
2.4 L models 1 ) Full level 2 ) Low level
3 ) Approximately 1.1 US qt ( 1.0 liter , 0.9 Imp qt ) from low level to full level
4 . Pull out the oil level gauge again .
5 . Check the oil level on both sides of the level gauge . The engine oil level must be judged by the lowest of the two levels . If the oil level is below the low level mark , add oil so that the full level is reached .
CAUTION
. Be careful not to touch the engine oil filter when removing the oil filler cap . Doing so may result in a burn , a pinched finger , or may cause some other injury .