518
Engine Hood
To open the hood :
1 . If the wiper blades are lifted off the windshield , return them to their original positions .
2 . Pull the hood release knob under the instrument panel .
3 . Release the secondary hood lock by moving the lever between the front grille and the hood toward the left . compartment .
To close the hood :
1 . Lift the hood slightly and remove the hood prop from the slot in the engine compartment and return the prop to its retainer .
2 . Lower the hood to a height of approximately 7.8 to 11.8 in ( 20 to 30 cm ) above its closed position and then let it drop .
3 . After closing the hood , be sure the hood is securely locked .
If this does not close the hood , release it from a slightly higher position .
WARNING
Always check that the hood is properly locked before you start driving . If it is not , it might fly open while the vehicle is moving and block your view , which may cause an accident and serious bodily injury .
4 . Lift up the hood , release the hood prop from its retainer and put the end of the hood prop into the slot in the engine