458
Loading Your Vehicle
avoid rapid starts , hard cornering and abrupt stops . Crosswind effects will be increased . . Restore the bars to the original position when the bars are not used as crossbars .
! How to use as crossbars CAUTION s08aj0802
. Do not raise the bar higher than necessary . The base of the bar may be damaged .
. Be careful not to contact the bars while sliding them . Otherwise , the bars may be scratched or the latch portions may be damaged .
. Do not slide the bar more than necessary when sliding the bar . The base of the bar may be damaged .
. Do not allow the bar to fall on or contact the roof panel or the moonroof when sliding the bar . Otherwise the roof panel may be dented or the glass of the moonroof may be damaged .
. Be careful hands do not become pinched when operating the cross bar . Hands becoming
pinched could result in injury .
1 . Pull out the integrated crossbars from the roof rail holders by pulling up the covers .
2 . Slide the bars in the direction shown in the illustration .
3 . Install the bars into the holders .
4 . Make sure that the latches are fitted securely .
! How to change the position of the crossbar s08aj080201
WARNING
Carefully read the warning label attached to the roof rail .
You can change the position of the rear crossbar . To change the position , perform the following procedure .
1 . Take out the torque wrench from the under-floor storage compartment .