Rear View Camera 403 |
|||
|
frozen on the camera , you must be very careful when removing it . Otherwise , damage to the camera may cause a fire or electric shock . Pour water or lukewarm water over the camera to remove mud and ice , and wipe it with a soft , dry cloth .
. Do not put a flame close to the camera or wiring . Otherwise , damage or fire may occur .
. When replacing the fuse , be sure to use a fuse with the specified rating . Use of a fuse with a different rating may result in a malfunction .
. If you use the rear view camera for a long time while the engine is not operated , the battery may become completely discharged .
NOTE
. Do not wipe the camera with alcohol , benzine or paint thinner . Otherwise , discoloration may occur . To remove contamination , wipe the camera with a cloth moistened with a diluted neutral detergent . Then wipe it with a soft , dry cloth . . When waxing the vehicle , be careful not to apply the wax to the camera . If it
|
comes in contact with the camera , moisten a clean cloth with a diluted neutral detergent to remove the wax . . The camera lens has a hard coating to help prevent scratches . However , when washing the vehicle or cleaning the camera lens , be careful not to scratch the camera lens . Do not use a washing brush directly on the camera lens . The image quality of the rear view camera may deteriorate . . Strong light shined on the camera lens may develop vertical lines around the light source . This is not a malfunction . . Under the fluorescent light , the display may flicker . However , this is not a malfunction . . The image of the rear view camera may be slightly different from the actual color of the objects . . If there is a malfunction on the center information display , refer to “ Malfunctions of the Center Information Display ” FP498 .
& How to Use the Rear View Camera s07br01
When the select lever is set to “ R ”, the rear view camera automatically displays the rear view image from the vehicle . When the lever is set to other positions , the
|
image before setting to “ R ” is displayed . 1 . Set the ignition switch to “ ON ”. 2 . Set the select lever to “ R ”.
NOTE
. The image of the rear view camera is horizontally reversed as is the case with the vehicle inside mirror or the outside mirror . . When “ Rear Camera Delay Control ” is on , the rear view image will be displayed on the center information display for a certain period of time after the select lever is shifted to a position other than the “ P ” position from “ R ”. To turn the function on and off , refer to “ General settings ” FP221 ( 11.6-inch display models ) or “ General settings ” FP239 ( dual 7.0-inch display models ). . It may be difficult to see the image of the rear view camera in the following cases . This is not a malfunction of the camera . – The vehicle is in a dark place ( at night , in a tunnel , etc .). – The vehicle is in an extremely hot or cold place . – An object ( such as raindrops , snow , dirt , etc .) that disturbs the view of the rear view camera sticks to the lens of the camera .
|
7
Starting and Operating
|
– CONTINUED – |