Vehicle Dynamics Control System 381 |
|||
|
spare tire . However , even with the specified temporary spare tire , the effectiveness of the Vehicle Dynamics Control system will be reduced .
. If non-matching tires are used , the Vehicle Dynamics Control system may not operate correctly .
In the event of wheelspin and / or skidding on a slippery road surface and / or during cornering and / or an evasive maneuver , the Vehicle Dynamics Control system adjusts the engine ’ s output and the wheels ’ respective braking forces to help maintain traction and directional control .
. Traction Control Function
The traction control function is designed to prevent spinning of the driving wheels on slippery road surfaces , thereby helping to maintain traction and directional control . Activation of this function is indicated by flashing of the Vehicle Dynamics Control operation indicator light .
. Skid Suppression Function
The skid suppression function is designed to help maintain directional stability by suppressing the wheels ’ tendency to slide sideways during steering operations . Activation of this function is indicated by
|
flashing of the Vehicle Dynamics Control operation indicator light .
NOTE
. The Vehicle Dynamics Control system may be considered normal when the following conditions occur . – Slight twitching of the brake pedal is felt . – The vehicle or steering wheel shakes to a small degree . – An operating noise from the engine compartment is heard briefly when starting the engine and when driving off after starting the engine . – The brake pedal seems to jolt when driving off after starting the engine . . In the following circumstances , the vehicle may be less stable than it feels to the driver . The Vehicle Dynamics Control System may therefore operate . Such operation does not indicate a system malfunction . – On gravel-covered or rutted roads – On unfinished roads – When the vehicle is towing a trailer ( Outback / Subaru Outback Wilderness ) – When the vehicle is fitted with snow tires or winter tires
|
. Activation of the Vehicle Dynamics Control system will cause operation of the steering wheel to feel slightly different compared to that for normal conditions . . It is always important to reduce speed when approaching a corner , even if the vehicle is equipped with Vehicle Dynamics Control . . Always turn off the engine before replacing a tire as failure to do so may render the Vehicle Dynamics Control system unable to operate correctly .
& Vehicle Dynamics Control System Monitor s07an01
Refer to “ Vehicle Dynamics Control Warning Light / Vehicle Dynamics Control Operation Indicator Light ” FP192 and “ Vehicle Dynamics Control OFF Indicator Light ” FP193 .
& To Turn On / Off the Vehicle Dynamics Control System
s07an07
To turn the Vehicle Dynamics Control on and off , operate the center information display . Refer to “ Car settings ” FP226 ( 11.6-inch display models ) or “ Vehicle setting icons ” FP246 ( dual 7.0-inch display models ).
Creating an adequate driving wheel slip by
|
7
Starting and Operating
|
– CONTINUED – |