362
Remote Engine Start System ( Dealer Option )
mote engine start system .
NOTE
. The length of time for which it is acceptable to allow the engine to remain idling may be bound by local laws and regulations . Check the local rules when using the remote engine start system . . When taking your vehicle in for service , it is recommended that you inform the service personnel that your vehicle is equipped with a remote engine start system .
& Remote Engine Starter Transceiver ( Fob )
1 ) Fob button s07az21
! Starting the engine s07az2101
NOTE
All vehicle doors ( including rear gate ) and the engine hood must be closed prior to activating the remote engine start system . Any open entry point will prevent starting or cause the engine to stop .
The remote engine start system is activated by pressing the fob button on your remote engine starter transceiver ( fob ) twice within 3 seconds . If the fob is within operating range of the system and the start request is received , the following will occur .
. The fob flashes and beeps once . . The horn sounds once .
. The side marker lights , tail lights , and parking lights flash once .
If the fob is not within range ( the user is too far away from the vehicle ), the fob will indicate two long flashes without beeping .
The system will check certain safety preconditions before starting , and if all conditions are met , the engine will start within 5 seconds . After the engine starts , the following will occur .
. The fob flashes and beeps twice . . The horn sounds once .
. The side marker lights , tail lights , and parking lights flash once .
While the engine is idling via the remote engine start system , the following will occur .
. The side marker lights , tail lights , and parking lights remain illuminated .
. The fob button flashes once every 3 seconds .
. The power windows are disabled .
If the engine turns over but does not start ( or starts and stalls ) the remote engine start system will power off and then attempt to start the engine 3 additional times . The system will not attempt to restart the engine if it determines a vehicle malfunction is preventing starting . If the engine does not start after 3 additional attempts , the remote engine start request will be aborted .
! Stopping the engine s07az2102
Press and hold the fob button for at least 2 seconds to stop the engine . The fob will flash and beep three times , indicating the engine has stopped . If the stop request is not received ( for example , if the user is too far away from the vehicle ), the fob will continue to flash once every 3 seconds . The system will automatically stop the engine after 15 minutes .