Mirrors 289 released .
1 ) Garage door opener remote
6 . While the HomeLink programming instructions are displayed , press and hold the hand-held remote button .
NOTE
Some hand-held remotes ( garage door opener remotes ) may actually train better at a distance of 6 to 12 in ( 15 to 30 cm ). Keep this in mind if you have difficulty with the programming process .
7 . Be sure your garage door is not moving , then press OK .
8 . Firmly press the HomeLink left button 3 times .
At this point , your device should operate when the HomeLink button is pressed and
9 . “ Program Success ”:
If the programmed HomeLink button works , select “ Yes ” and programming is completed .
If the programmed HomeLink button does not work , select “ No ” and proceed to step 10 .
1 ) “ Learn ” button
10 . At the garage door opener motor , ( security gate motor , etc .) locate the “ Learn ”, “ Smart ”, or “ Program ” button . This can usually be found where the hanging antenna wire is attached to the motor-head
– CONTINUED –
3
Instruments and Controls