Mirrors 287 |
|
! Compass calibration s03ap110703
If the compass appears inaccurate , recalibrate the compass .
|
go directly to the HomeLink website . Additional information and programming videos can be found at www . HomeLink . com / Subaru and www . youtube . com / HomeLinkGentex . |
CAUTION |
|||||||
|
1 . Select “ CALIBRATE ” using the right button .
2 . To start the compass calibration , press the center button .
3 . Select “ Continue ” using the center button .
|
4 . Select your current location in the display using the left button .
5 . Select “ Continue ” using the center button .
6 . Once “ C ” appears in the display , slowly drive the vehicle in circles until compass is calibrated .
! HomeLink ® Wireless Control System s03ap1108
The HomeLink ® Wireless Control System provides a convenient way to replace up to three hand-held radio-frequency remotes used to activate devices such as gate operators , garage door openers , entry door locks , security systems , and even home lighting . The below steps are generic programming instructions ; for Genie and Sommer garage door openers , please
|
. Before programming HomeLink to a garage door opener or gate operator , make sure that people and objects are out of the way of the device to prevent potential harm or damage .
. When programming a garage door opener , it is advised to park outside of the garage .
. Do not use HomeLink with any garage door opener that lacks safety stop and reverse features , as required by U . S . federal safety standards ( this includes any garage door opener model manufactured before April 1 , 1982 ). A garage door that cannot detect an object signaling the door to stop and reverse does not meet current U . S . federal safety standards .
. It is also recommended that a new battery be placed in the handheld remote ( garage door opener
|
3
Instruments and Controls
|
||||
– CONTINUED – |