! Sensor for the auto on / off headlights s03ah0101 |
& High / Low Beam Change ( Dimmer ) |
s03ah02 |
& Headlight Flasher |
s03ah03 |
3 |
||||||||||||
|
The sensor is on the instrument panel as shown in the illustration .
CAUTION
If any object is placed on or near the sensor , the sensor may not detect the level of the ambient light correctly and the auto on / off headlights may not operate properly .
|
While the light control switch is in the “ ” or “ ” position in a dark place , the headlights will turn on .
When the headlights are on high beam , the high beam indicator light “ ” on the combination meter is also on .
NOTE
While the light control switch is in the “ ” position and the lever is the high beam position , the high beam assist function will be on standby .
|
CAUTION
Do not hold the lever in the flashing position for more than just a few seconds .
To flash the headlights , pull the lever toward you and then release it . The high beam will stay on for as long as you hold the lever . The headlight flasher works even though the lighting switch is in the off position .
When the headlights are on high beam , the high beam indicator light “ ” on the combination meter also illuminates .
|
Instruments and Controls |
|||||||||
– CONTINUED – |