256
Light Control Switch
Dual 7.0-inch display models
1 . Touch “ Valet Mode ” or select OFF ( 11.6-inch display models ).
Touch “ Deactivate ” ( dual 7.0-inch display models ).
2 . Enter the passcode . 3 . Touch “ OK ”.
NOTE
If you enter the passcode incorrectly three times in a row when setting or canceling valet mode , a message prompting you to contact a SUBARU dealer will be displayed , but it is still possible to enter the passcode even after the fourth attempt .
If you have forgotten your passcode , consult your SUBARU dealer .
3-11 . Light Control Switch
CAUTION s03ah
. Use of any lights for a long period of time while the engine is not running can cause the battery to discharge .
. Before leaving the vehicle , make sure that the light control switch is turned to the off position . If the vehicle is left unattended for a long time with the light control switch set to a position other than the off position , the battery may be discharged .
Models with “ keyless access with push-button start system ”:
The light control switch operates when the push-button ignition switch is in the “ ACC ” or “ ON ” position .
Regardless of the position of the light control switch , the illuminated lights are turned off when the push-button ignition switch is turned off .
Models without “ keyless access with push-button start system ”:
The light control switch operates when the key is inserted in the ignition switch .
Regardless of the position of the light control switch , the illuminated lights are turned off when the key is removed from the ignition switch .
NOTE
The light control switch can be operated ( except auto on / off headlights ), even under the following conditions .
. When the push-button ignition switch is turned off ( models with “ keyless access with push-button start system ”) . When the key is not inserted into the ignition switch ( models without “ keyless access with push-button start system ”)
If the driver ’ s door is opened while the headlights are illuminated under such conditions , a chirp sound will inform the driver that the lights are illuminated .