238
Center Information Display ( CID )
Oil Filter change reminder :
The setting procedure is the same as the “ Engine Oil ” reminder , but touch the “ Oil Filter ” item in step 2 .
Tires rotation reminder :
The setting procedure is the same as the “ Engine Oil ” reminder , but touch the “ Tires ” item in step 2 .
Maintenance Schedule setting :
The setting procedure is the same as the “ Engine Oil ” reminder , but touch the “ Maintenance Schedule ” item in step 2 .
NOTE
. Touch “ Reset ” to reset each setting . . Touch “ Update ” to revert to the default value .
& Dual 7.0-Inch Display Models ( If Equipped ) s03bs06
NOTE
For 11.6-inch display models , refer to “ 11.6-Inch Display Models ” FP214 .
! Main screens s03bs0601
A ) |
Upper display |
B ) |
Lower display |
1 ) |
HOME button ( Refer to “ HOME button ” |
FP238 .) |
2 ) |
Status bar ( Refer to “ Status bar ” FP238 .) |
3 ) Upper main screen ( Refer to “ Setting of the upper display ” FP239 .)
4 ) Lower main screen ( Refer to “ Setting of the lower display ” FP243 .)
5 ) Climate control screen ( Refer to “ Climate control screen ” FP239 .)
While the ignition switch is in the “ ACC ” or “ ON ” position , the touch panel will activate .
! HOME button s03bs0609
Press ( HOME ) to display the top menu .
! Status bar s03bs060901
The driver profiles icon , outside temperature and clock are shown on the display .
NOTE
. The outside temperature indicator shows the temperature around the sensor . However , the temperature may not be indicated correctly or the update may be delayed in the following conditions . – While parking or driving at low speeds – When the outside temperature changes suddenly ( example : when going in and out of an underground parking area or when passing through a tunnel ) – When starting the engine after being parked for a certain period of time