|
1 ) Power rear gate button
2 . Press and hold the power rear gate button to register the height . An electronic chirp sounds and the hazard warning flashes for confirmation .
The rear gate will stop at the registered position when the memory function is on .
NOTE
. Register the rear gate height to turn on the “ Power Rear Gate Memory ” automatically . For details , refer to “ Car settings ” FP226 . . To change the registered height , perform the registering procedure again . . It is possible to register the height from approximately 2 in ( 5 cm ) or more
|
from the completely closed position .
! Deactivation of the memory function s02aj010103
Deactivate the memory function to open the rear gate fully . Perform either of the following operation to deactivate the memory function .
– Deactivate the “ Power Rear Gate Memory ” function on the center information display ( CID ). Refer to “ Car settings ” FP226 .
– Register the position of the rear gate at the fully open position .
! Utilizing the memorized rear gate height s02aj010102
To open the rear gate and stop it at the registered height , perform the following procedure .
1 . Check that “ Power Rear Gate Memory ” is on . Refer to “ Car settings ” FP226 .
2 . Press and hold any of the power rear gate button .
NOTE
The rear gate will open to the position that is stored in the memory function even if the rear gate is opened by the reverse function .
|
! Reverse function
WARNING
s02aj0102
. Do not let parts of your body get caught when operating the reverse function . If the reverse function does not operate for some reason , this may lead to serious injury or accidents .
. The reverse function may not operate if foreign objects are caught in the rear gate just before it closes completely . Be careful not to catch your fingers and other body parts .
. The reverse function may not operate depending on the object shape and the manner in which it was caught . Be careful not to catch your fingers and other body parts .
|
CAUTION
. If the reverse function is operated 3 times consecutively , automatic opening and closing of the power rear gate function will be canceled and the rear gate will stop opening or closing suddenly .
|
2
Keys and Doors
|
|
– CONTINUED – |