|
& Power Saving Function of Access Key Fob s02ap26
This function stops the access key fob from receiving signals and helps minimize the battery consumption of the access key fob .
1 . Press the “ ” button twice while holding the “ ” button .
|
& Disabling Keyless Access Function s02ap07
WARNING
If you have an implanted pacemaker or an implanted defibrillator , perform the procedure “ By operating the driver ’ s door ” FP131 to disable the keyless access function . If you perform the procedure “ By operating the access key fob ” FP129 , the operation of an implanted pacemaker or implanted defibrillator may be affected by the radio waves from the transmitter antenna .
|
! Disabling functions s02ap0701
! By operating the access key fob s02ap070102
To disable the keyless access function by operating the access key fob , register a PIN code for PIN Code Access . For details about registering a PIN code , refer to “ Unlock Using PIN Code Access ” FP126 .
1 . Open the driver ’ s door .
|
2
Keys and Doors
|
||||||
|
When the vehicle is not going to be used for a long time , or when you choose not to use the keyless access function , the keyless access function can be disabled .
NOTE
. The locking and unlocking function by the remote keyless entry system is not disabled . . To start the engine while the functions are disabled , perform the procedure described in “ Starting Engine ” FP497 .
|
|||||||||
1 ) LED indicator |
2 . Confirm that the LED indicator blinks 4 times to notify that the setting is complete .
When the access key fob is in the power save mode , the keyless access function and push-button start system will not be available .
To cancel the power save mode , press one of the buttons on the access key fob .
|
2 . Rotate the lock lever forward . |
|||||||
– CONTINUED – |