Starting and operating/Cruise control
The vehicle will maintain the desired
speed.
Vehicle speed can be temporarily in-
creased while driving with the cruise
control activated. Simply depress the
accelerator pedal to accelerate the vehi-
cle. When the accelerator pedal is re-
leased, the vehicle will return to and
maintain the previous cruising speed.
WARNING
Do not place the select lever in the
“N” position while driving. If the
select lever is shifted into the “N”
position, cruise control can be can-
celed but the engine brake will no
longer work. This could result in an
accident.
S07AQ02 The cruise control set indicator in the
combination meter disappears when the
cruise control is canceled.
. Press the “CANCEL” button.
. Press the X-MODE switch to activate
the X-MODE (models with X-MODE).
. Depress the brake pedal. To resume the cruise control after it has
been temporarily canceled and with vehi-
cle speed of approximately 20 mph (30
km/h) or more, press the “RES/SET”
switch to the “RES” side to return to the
original cruising speed automatically.
& To temporarily cancel the
cruise control
The cruise control can be temporarily
canceled in the following ways.
7-47
The cruise control set indicator in the
combination meter will automatically ap-
pear at this time.
& To turn off the cruise control
S07AQ03
There are two ways to turn off the cruise
control:
. Press the cruise control main button
again.
. Turn the ignition switch to the “ACC” or
“LOCK”/“OFF” position (but only when the
vehicle is completely stopped).
– CONTINUED –