Keys and doors/Rear gate (Outback)
If you press the power rear gate button
again, the rear gate will close. You can
open the rear gate by pressing the power
rear gate button briefly while the rear gate
is being closed.
! Memory function
S02AJ0101
To close the rear gate:
Briefly press either of the following but-
tons.
. rear gate opener button
. power rear gate button on the inside
edge of the rear gate
If you press the power rear gate button
again, the rear gate will open.
! Manual operation
NOTE
2-45
registered.
Registration of the rear gate height:
To register the rear gate height, perform
the following procedures while the ignition
switch is in the “LOCK”/“OFF” position.
1. Open the rear gate by using the power
rear gate function.
2. With the rear gate at the desired
height, stop it by using the power rear gate
function.
3. Press the memory switch to select the
“ON” status.
Memory switch
S02AJ0108
Using the power rear gate operation is
recommended. Manual operation will
require physical effort.
The power rear gate can be closed
manually. Refer to “Manual rear gate”
F2-41.
Power rear gate button on the inside edge
of the rear gate
Memory switch status
1) ON status
2) OFF status
Your desired rear gate height can be
4. With the rear gate at the desired
height, press and hold the power rear gate
button on the inside edge of the rear gate
until an electronic chirp is heard and the
– CONTINUED –