Maintenance and service/Replacing bulbs
! Outback
S11BE0702
11-45
3. Pull the bulb out of the socket.
4. Install a new bulb.
5. Reinstall the bulb socket and the
license plate light cover.
& Dome light
S11BE08
3. Turn the bulb socket counterclockwise
and remove it.
4. Pull the bulb out of the bulb socket and
replace it with a new one.
5. Install the bulb socket by turning it
clockwise.
6. Reconnect the electrical connector.
7. Reinstall the trunk trim lining.
1. The license plate light must be pushed
inwards, and then pulled out to be
removed.
1. Remove the lens by prying the edge of
the lens with a flat-head screwdriver.
2. Turn the bulb socket counterclockwise
and pull out the socket.
– CONTINUED –