Subaru Legacy Manuals 2018 Legacy Owner's Manual | Page 451

Maintenance and service/Replacing bulbs 11-43 & Backup light S11BE06 ! Legacy NOTE S11BE0601 It may be difficult to replace the bulbs. We recommend that you have the bulbs replaced by your SUBARU dealer if necessary. 1. Open the trunk. 8. Reinstall the rear combination light assembly by sliding the two-pronged part of the combination light assembly securely to each holder of the vehicle side. 3. Turn the bulb socket counterclockwise and remove it. 4. Pull the bulb out of the bulb socket and replace it with a new one. 5. Install the bulb socket by turning it clockwise. 6. Reconnect the electrical connector. 7. Reinstall the trunk trim lining. 2. Remove the trunk trim lining by remov- ing the clips indicated in the illustration. 9. Tighten the upper and lower screws. 10. Reinstall the side cover. – CONTINUED –