In case of emergency/Rear gate (Outback) – if the rear gate cannot be opened
Rear gate (Outback) – if the
rear gate cannot be opened
9-21
Always use a flat-head screwdriver
or a similar tool.
S09AU
In the event that you cannot open the rear
gate by pressing the rear gate opener
button (all models) or using the power rear
gate (if equipped), you can open it from
inside the cargo area.
To open the trunk lid, insert the key into the
key cylinder and turn it clockwise.
NOTE
For models with “keyless access with
push-button start system”:
The emergency key is directional. If the
key cannot be inserted, change the
direction that the grooved side is facing
and insert it again.
Models without power rear gate
1. Remove the access cover at the
bottom-center of the rear gate trim using
flat-head screwdriver.
2. Locate the rear gate lock release lever
behind the rear gate trim panel.
CAUTION
Never operate the rear gate lock
release lever with your fingers be-
cause doing so may cause an injury.
Models with power rear gate
3. Turn the lever to the right position using
– CONTINUED –