2-20
Keys and doors/Keyless access with push-button start system
– When the keyless access func-
tions are not going to be used
! By operating the driver’s door
S02AP070101
1. Sit in the driver’s seat, and close the
door.
! Disabling functions
S02AP0701
! By operating the access key fob
S02AP070102
If you have registered a PIN code for PIN
Code Access, you can disable the keyless
access function by operating the access
key fob. For details about registering a PIN
code, refer to “Registering a PIN code”
F2-23.
1. Open the driver’s door.
3. Press and hold the “ ” button and “ ”
button on the access key fob simulta-
neously for more than 5 seconds.
A chirp sound will be heard, and the
function will be disabled.
2. Rotate the lock lever forward.
2. Push the rear side (unlock side) of the
power door locking switch.
3. Within 5 seconds after step 2 is
performed, open the driver’s door.
4. Within 5 seconds after step 3 is
performed, push the rear side (unlock
side) of the power door locking switch
twice while the door is open.
5. Within 10 seconds after step 4 is
performed, close and open the driver’s
door twice.
6. Within 10 seconds after step 5 is
performed, push the rear side (unlock
side) of the power door locking switch
twice while the door is open.