Subaru Legacy Manuals 2017 Legacy Owner's Manual | Page 422

Starting and operating/Cruise control 7-51 maintain the previous cruising speed. nation meter will appear. 2. Depress the accelerator pedal until the vehicle reaches the desired speed. & To temporarily cancel the cruise control The cruise control can be temporarily canceled in the following ways. 3. Press the “RES/SET” switch to the “SET” side and release it. Then release the accelerator pedal. Cruise control set indicator 1) When setting the displayed unit as “MPH”. 2) When setting the displayed unit as “km/h”. At this time, the cruise control set indicator appears in the combination meter. The set speed will be shown on the combination meter. You can change the displayed unit by operating the multi information display. For details, refer to “Units” F3-44. The vehicle will maintain the desired speed. . Press the “CANCEL” button. . Press the X-mode switch to activate the X-mode (models with X-mode). . Depress the brake pedal. . Depress the clutch pedal (MT models). Vehicle speed can be temporarily increased while driving with the cruise control activated. Simply depress the accelerator pedal to accelerate the vehicle. When the accelerator pedal is released, the vehicle will return to and For CVT models, do not place the select lever in the “N” position while driving. If the select lever is shifted into the “N” position, cruise control can be canceled but the engine WARNING – CONTINUED –