7-46
Starting and operating/Parking your vehicle
Holder function is activated, a chirp
sound is heard, the Hill Holder indicator light turns off and the brake system
warning light turns on.
. When the hill holder activates on a
slope, the electronic parking brake is
engaged. The electronic parking brake
will release when you accelerate from
the stop. If you manually release the
electronic parking brake while the hill
holder is activated, the hill holder
function is canceled and will not reengage until the vehicle has moved
some distance. In that case, you will
need to manually engage the electronic
parking brake if needed.
! Hill Holder switch
WARNING
When stopping on an uphill slope
with the Hill Holder function activated, release the brake pedal after
the electronic parking brake indicator light has illuminated. Otherwise,
the Hill Holder function may not
operate properly and an accident
may occur.
MT models
You can activate/deactivate the Hill Holder
function by pressing the Hill Holder switch.
To activate: Press the Hill Holder switch.
To deactivate: Press the Hill Holder
switch again.
CVT models
Deactivate the Hill Holder function under
the following conditions.
. When towing a trailer (Outback)
. When carrying a heavy load
. When you do not frequently use the
parking brake when stopping on an uphill
slope
NOTE
. If the Hill Holder switch is pressed
for more than 30 seconds, the Hill
Holder indicator light turns off and the