Subaru Legacy Manuals 2017 Legacy Owner's Manual | Page 183

3-28 Instruments and controls/Warning and indicator lights Inside warning chime indicator Outside warning Operation on push-button chime ignition switch Status Action — Access key warning for engine start: The push-button ignition switch is pressed while the access key is not inside the vehicle. Ding Beep, beep, beep (3 times) — Access key takeout warning: The driver exits the vehicle with the access Switch the push-button ignition switch to key and closes the driver’s door while the “OFF”, and get out of the vehicle. push-button ignition switch is in a position other than “OFF” and the select lever is in the “P” position. Ding Beep, beep, beep (3 times) — Passenger access key takeout warning: A fellow passenger exits the vehicle with the Return the access key to inside the vehicle, access key and closes a door other than the or switch the push-button ignition switch to driver’s door while the push-button ignition “OFF”. switch is in a position other than “OFF”. — Access key takeout without “P” position warning: The driver exits the vehicle with the access Shift the select lever to the “P” position, switch the push-button ignition switch to key and closes the driver’s door while the “OFF” and exit the vehicle. push-button ignition switch is in a position other than “OFF” and the select lever is in a position other than the “P” position. — Select lever position warning: . . Case 1: The engine is turned off by pressing the push-button ignition switch while the select lever is in a position other than the “P” position. . . Case 2: The driver’s door is opened while the push-button ignition switch is in a position other than “OFF” and the select lever is in a position other than the “P” position. Ding — Long beep (continuous) Long beep (continuous) Long beep (continuous) — Carry the access key, and press the pushbutton ignition switch. Case 1: Start the engine, shift the select lever to the “P” position, switch the push-button ignition switch to “OFF” and exit the vehicle. Case 2: Shift the select lever to the “P” position, switch the push-button ignition switch to “OFF” and exit the vehicle.