2-36
Keys and doors/Windows
! Anti-entrapment function
CAUTION
. Never attempt to test this function using fingers, hands or other
parts of your body.
. The anti-entrapment function
may not operate properly if some
object gets trapped just before
the window fully closes.
tial enough object trapped between t he
window and the window frame, it automatically moves down slightly and stops.
! Operating the rear passengers’
windows
! Locking the passengers’ windows
NOTE
. If a window detects an impact similar to that caused by trapping an object
(for example, when the vehicle encounters a deep pothole), the anti-entrapment function may operate.
. The window cannot be operated for
a few seconds after the anti-entrapment function operates.
. If the vehicle’s battery is disconnected due to situations such as
battery or fuse replacement, the antientrapment function will be deactivated. Initialize the power window to
reactivate the anti-entrapment function.
Refer to “Initialization of power window” F2-38.
While closing with the one-touch auto up
function, if the window senses a substan-
1)
2)
To open:
Press the appropriate switch down and
hold it until the window reaches the
desired position.
To close:
Pull the switch up and hold it until the
window reaches the desired position.
Lock
Unlock
To lock:
Press the lock switch. When the lock
switch is in the lock position, the passengers’ windows cannot be opened or
closed.
To unlock:
Press the lock switch again.