Keys and doors / Remote keyless entry system
2-25
& Operating the access key NOTE
The remote keyless entry system will not be activated when the push-button ignition switch is in any position other than the“ OFF” position.
Access key |
1) |
Lock / arm button |
2) |
Unlock / disarm button |
3) |
Trunk lid opener / rear gate unlock button |
4) |
PANIC button |
! Locking the doors
Press the lock / arm button to lock all doors and rear gate( Outback). When the doors( including the rear gate) are locked, an electronic chirp will sound once and the hazard warning flashers will flash once.
If any of the doors( or the rear gate / trunk lid) is not fully closed, the following will occur to alert you that the doors( or the rear gate / trunk lid) are not properly closed.
. an electronic chirp sounds five times.
. the hazard warning flashers flash five times.
When you close the door, it will automatically lock and then the following will occur.
. an electronic chirp sounds once.. the hazard warning flashers flash once.! Unlocking the doors
Press the unlock / disarm button to unlock the driver’ s door. An electronic chirp will sound twice and the hazard warning flashers will flash twice. To unlock all doors and the rear gate( Outback), briefly press the unlock / disarm button a second time within 5 seconds.
NOTE
If the interval between the first and second presses of the unlock / disarm button( for unlocking of all of the doors and the rear gate) is extremely short, the system may not respond.
! Opening the trunk lid( Legacy)
Press and hold the trunk lid opener button to open the trunk lid. An electronic chirp will sound twice and the hazard warning flashers will flash twice.
! Unlocking the rear gate( Outback)
Press the rear gate unlock button to unlock the rear gate. An electronic chirp will sound twice and the hazard warning flashers will flash twice.
! Selecting audible signal operation
Using an electronic chirp, the system will give you an audible signal when the doors are locked or unlocked. If desired, you can turn the audible signal off by operating the multi information display. For details, refer to“ Keyless Entry System” F3-45.
Furthermore, the volume setting of the audible signal can also be changed by a SUBARU dealer. Consult your SUBARU dealer for details.
! Selecting hazard warning flasher operation
Using the hazard warning flasher, the system will give you a visible signal when the doors are locked or unlocked. If desired, you can turn the hazard warning flashers off by operating the multi information display. For details, refer to“ Keyless Entry System” F3-45. The setting can
– CONTINUED –