5-94
Audio/Phone operation (Hands free system for cellular phones)
Incoming Call screen
No. Function
2
& “Hold” key: Puts the incoming call on
hold. This function may not work on
some cell phone models. This func
tion is the same as pressing the
“ON Hook” switch on the steering
wheel for a short period of time.
3 & “OFF Hook” key: Opens the Call
screen. This function is the same as
pressing the “OFF Hook” switch on
the steering wheel.
4
& “ON Hook” key: Rejects the incoming
call. This function is the same as
pressing and holding the “ON Hook”
switch on the steering wheel.
NOTE
Unable to put call on hold screen
No.
1
&
Function
“Option” key: Opens the Options
(volume settings) screen.
. During international phone calls, the
other party’s name or number may not
be displayed correctly depending on
the type of cellular phone you have.
. The incoming call display mode can
be set. Refer to “Incoming Calls” F5-
88.
. The ringtone that has been set in the
“Sound Settings (Sound Settings)”
screen sounds when there is an incom-
ing call. Depending on the type of
Bluetooth phone, both the system and
Bluetooth phone may sound simulta-
neously when there is an incoming call.
Refer to ““Sound Settings (Sound Set-
tings)” screen” F5-96.
& Talking on the Bluetooth
phone
While talking on the phone, this screen is
displayed. The operations outlined below
can be performed on this screen.
. When the Incoming Call screen is
displayed and you accept the call, the
screen changes to the Call screen. The
screen stays on the Incoming Call screen
if you reject the call.
. The “Dialpad” and “Bluetooth Setting”
keys are disabled on the Incoming Call
screen.
The Call screen opens when you perform
the following operations.
. When you accept a call on the Incom-
ing Call screen (by selecting the
“OFF_Hook” key), the Call screen opens.
. When you are on the Outgoing Call
screen, the screen changes to the Call
screen when the other party answers the
call.